PSI Conversion Announces Gen-V LT1 Standalone Wiring Harnesses & Engine Controller Kits

It seems like only yesterday when the LS-series engines had taken the world by storm, and they started popping up in everything from ’69 Camaros to airplanes. It’s been said time and time again that they’re the “new small-block” in terms of their parts availability, ease of modification and their compact design.

Well there’s a new kid in town, and already, they’re becoming the new go-to engine for hot-rodders and car builders all over. Dubbed the LT1, it packs more horsepower, torque and tech than its successor and although its been out and about for almost five years, the aftermarket and the general public have been taking their time in embracing it.

While that it’s partly due to the aforementioned tech, tuning and the still somewhat unfamiliarity of the engine, but luckily, our friends at PSI Conversion are helping move it alone with their new Standalone Harnesses and ECUs!

Official Release:

LT1 / L83 / L86 Gen V Standalone Wiring Harnesses & Engine Controller Kits – Now Available Though PSI Conversion!

Brick, NJ. October, 2018 – PSI is pleased to introduce their new LT1/L83/L86 Standalone Wiring Harnesses for the new 2014+ 5.3L and 6.2L GM Gen V Direct Injection Engines.

These harnesses are designed for retrofitting 2014+ LT1/LT4/Ecotec3 (L83/L86) engines with Manual or 6L80E/6L90E transmissions into older muscle cars/street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and approx. 4 feet of length from the rear of the passenger cylinder head to the ECM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Factory/OEM Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All harnesses are 100% Quality Inspected prior to shipping. All harnesses require ECM VATs removal, available through PSI. Please contact PSI for more information.

APPLICATION: 2014+ CORVETTE LT1, 2016+ CAMARO LT1, ECOTEC3 L83/L86 ENGINES WITH MANUAL OR 6L80E/6L90E

PARTS INCLUDED: Complete Standalone Wiring Harness, Instruction Manual

Features:

  • Completely plug and play with four wire hookup
  • Designed for retrofitting 2014+ LT1/LT4/Ecotec3 (L83/L86) engines with Manual or 6L80E/6L90E transmissions into older muscle cars/street rods or newer non-emissions controlled vehicles
  • Professionally constructed from Brand New GM Factory/OEM Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications
  • Made in USA
Source :

Share this post

46 comments

Add yours
  1. t.co 30 August, 2021 at 04:49 Reply

    Hey I know this is off topic but I was wondering if you knew of any widgets I could add
    to my blog that automatically tweet my newest twitter updates.
    I’ve been looking for a plug-in like this for quite some time and was hoping maybe you would have some experience with something like this.

    Please let me know if you run into anything. I truly enjoy reading your blog and I look forward to
    your new updates.

  2. Money Online 2 September, 2021 at 03:36 Reply

    Wow, fantastic weblog structure! How lengthy have you been blogging for? you make running a blog glance easy. The whole glance of your site is great, let alone the content!

  3. in asmr 4 September, 2021 at 04:53 Reply

    Hello there, I discovered your site by way of
    Google even as looking for a comparable matter, your site came up, it looks good.

    I’ve bookmarked it in my google bookmarks.

    Hi there, just changed into aware of your weblog via Google,
    and located that it is truly informative.
    I’m going to be careful for brussels. I will be grateful when you proceed this in future.
    Lots of other people will probably be benefited out of your writing.
    Cheers!

  4. bit.ly 10 September, 2021 at 22:50 Reply

    hey there and thank you for your information – I’ve certainly picked up something new from right here.
    I did however expertise several technical points using this site, as
    I experienced to reload the web site lots of times previous to I could get it
    to load properly. I had been wondering if your web host is OK?
    Not that I am complaining, but slow loading instances times will sometimes affect your placement in google and could damage your high quality score if ads
    and marketing with Adwords. Well I’m adding this RSS to
    my e-mail and can look out for a lot more of your respective interesting content.
    Ensure that you update this again soon. scoliosis surgery https://0401mm.tumblr.com/ scoliosis
    surgery

Post a new comment