Pace Performance’s Prime and Prepped LS3 570HP Crate Engine Package

Building a hot rod or a race car is certainly a time-consuming labor of love; finding a donor car, sourcing all of the hardware and trim, and putting together a driveline that works for its intended purpose. When it comes to the engine, it can be a tedious affair and there are seemingly limitless directions you can go.

More than ever, we’re seeing enthusiasts turn to crate engines from our friends in the aftermarket. There are OEM-type replacement crate engines out there, but if you’re really trying to stand out that may not be a perfect solution, either. Of course you can modify your crate engine, but more often than not it could effect the warranty.

So what do you do? Take a look at what is available for our friends at Pace Performance. In recent weeks, they’ve announced a 570hp crate engine that’s based on an LS3 — but provides an additional 140 horsepower — with a touch of personality and exclusivity.

Official Release:

PACE PERFORMANCE LS3 570HP CRATE ENGINE PACKAGE, PRIME AND PREPPED

We have taken the Pace Performance LS3 525HP engine to a new level! Now complete swap ready engine package with installed Holley oil pan. We have prep and primed the engine with Maxima break in oil so it’s ready to go when you receive it.

Included, but not installed:

  • Eddie Motorsports LS accessory drive
  • Pace high torque starter w/bolts

Engine Specifications:
Power: 570 HP @ 6600 RPM, 500 ft. lbs. of torque @ 5400 RPM
Displacement: 376 CID, 6.2L
Bore x Stroke: 4.060” x 3.620”
Compression Ratio: 10.7:1
Recommended Fuel: 92 Octane
Block: Cast Aluminum with 6 bolt cross bolted main caps
Crankshaft: Nodular Iron
Connecting Rods: Powdered Metal Steel
Pistons: Hypereutectic Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .640” Intake / .615” exhaust
Cam Duration @ .050”: 231deg. Intake / 246 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Aluminum L92 style ports
Combustion Chamber: 68cc
Valves: 2.165” Intake/ 1.590” Exhaust
Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio
Balance: Internal
Reluctor: 58X
Maximum GM Recommended RPM: 6600
GM Recommended Torque Converter Stall 3000-3400

Engine Includes:
• Fully GM assembled long block
• Ignition Coils, Plug Wires and Spark Plugs
• Oil pump, pick-up and Holley 302-1 oil pan
• Exhaust Manifolds
• EFI Intake with fuel rails, injectors and throttle body
• 14” Auto Trans Flexplate
• Harmonic Balancer
• Front timing cover
• Aluminum Water Pump
• Holley “Chevrolet” script valve covers
• HD Starter with Bolts
• Oil Filter
• Passenger Side RH Oil Dipstick and Tube

Warranty:
General Motors limited 1-year parts only warranty. Click Here to view or download warranty form.

Share this post